BUNKROOM ALERTS Request a demo

For fire & rescue departments

The call drops. Your map is already open.

Bunkroom Alerts puts your dispatch alerts, your own map books, every hydrant and your pre-plans on each member's iPhone. One app, built around how a crew actually rolls out the door.

Built by a working firefighter. Running live at a working firehouse today.

Everything the crew needs between the tones and the scene

Working today on iPhone.

  • Alerts in seconds

    Push alerts with your station's own tones, even when the phone is locked.

  • Each member picks what wakes them

    Their units, their first-due areas, working fires anywhere, or only while on shift.

  • Your map books, offline

    The right page opens for every call with the address pinned. Works with no signal.

  • Every hydrant, live

    In or out of service from the water utility, plus route, ETA and a finger-drawn hose measure.

  • Building info on scene

    FDC, Knox box, standpipe, alarm panel and sprinkler riser on the map, pulled from your pre-plans.

  • Live calls and units

    The call list and unit board, so nobody has to call the station to ask what's going on.

  • Search the books

    Type an address, a building name, or "FDC 100 Main St" and get the page and the spot.

  • Your department, your members

    Sign-up is approved by your admin. Crew notes, photos and hydrant checks are approved by an officer.

See it on the phone

Real screens from the app.

The live call list, showing three calls with box number, address, call type and the units assigned
Live calls. Every call the moment it drops, with the units on it.
The live map on satellite view, showing hydrants, FDCs and fire alarm panels on buildings downtown
Live map. Every hydrant, FDC and alarm panel, right on the satellite view.
The unit board, with engines, towers and trucks shown green when available and red when on a call
Unit board. Who’s available and who’s on a call, at a glance.
A page from a department map book, showing buildings, hydrants and FDC connections
Your map book. The page for the call opens on its own, hydrants and FDCs marked.
The My Alerts screen, with switches for our units, every call for my companies, fire calls and pre-alerts
Your alerts, your way. Each member picks which calls wake them, and for how long.
The map layers panel, listing 28,872 hydrants, unconfirmed hydrants and hydrants to check
Hydrants you can trust. In or out of service, and crews confirm the ones in question.

What makes it different

Your books. Not a generic map.

Most alerting apps drop a pin on a street map. Bunkroom Alerts opens the page from your department's own map book, the one your crews already trust, and marks the address on it.

The FDCs, Knox boxes and standpipes drawn in your books and pre-plans become tap-able icons on the live map, next to every hydrant and its current status.

For volunteer houses Coming soon

Know who's coming before the tones stop.

One tap from the alert: Responding to Station or Responding to Scene. The officer sees who's coming, how far out, and whether there's a driver and enough crew to get the first-due rig out the door.

Pair it with the Bunkroom kit: plug-in bunk-room lights and a buzzer set off by the same alerts. Station alerting for houses that can't spend thousands on a station system.

On the way

What we're building next. Pilot departments help decide the order.

  • Water supply plan

    On every fire call: the nearest working hydrants and how much supply line it takes to reach the address.

  • Bunkroom kit

    Bunk-room lights and buzzer, set off by the app's alerts.

  • Responding board

    To Station / To Scene, with driver and officer counts.

  • Crew-built pre-plans

    Photos pinned to the FDC, Knox box and panel during a walkthrough, approved by an officer.

  • Fast map-book setup

    Send us your books as PDFs; we get them on the phone in about a week.

  • NERIS reports

    Start the incident report from the call we already have.

Works with the dispatch you already have

No new radio and no new CAD. We connect to what your 911 center already sends. There are four ways, from the fastest to the simplest.

What's a pre-alert?

An alert the moment the call is entered, before units are assigned, so the crew is already moving. The full alert follows as soon as units are assigned.

Way inPre-alertsSpeedWhat it takes
1. Direct CAD link PreferredYesSeconds, with units and updatesData-sharing agreement and IT review with the 911 center
2. Public incident feedOftenFastNothing from the 911 center
3. Station alert screen readerYes, if your station gets themFastThe chief's OK and a small box in each station
4. Dispatch email or textUsually noAt dispatchOne email to the 911 center
  1. 1. Direct CAD link Preferred

    Your 911 center's CAD sends each call and every unit change straight to Bunkroom Alerts. This is the way we prefer: it gives the earliest pre-alerts and runs the pre-alert dashboard.

    Pre-alerts: yes, from the moment the call is entered.

    Takes: a data-sharing agreement with the 911 center and an IT review, sometimes a fee from the CAD vendor. Weeks to months to set up.

  2. 2. Public incident feed

    Many 911 centers post active calls on a public website or feed.

    Pre-alerts: often yes, because calls show up before units are assigned.

    Takes: nothing from the 911 center. We check that the feed's terms allow it. Medical calls are often hidden from public feeds.

  3. 3. Station alert screen reader

    A small box reads your station's alert screen or rip-and-run printer.

    Pre-alerts: yes, if your station already gets them.

    Takes: the chief's OK and a small box in each station. No help needed from the 911 center.

  4. 4. Dispatch email or text Simplest

    Your 911 center adds one more address to the paging list it already sends.

    Pre-alerts: usually no, because the page goes out at dispatch with units. Yes if the 911 center already sends a pre-alert page.

    Takes: one email to the 911 center.

  • Use two at once

    We can run two of these together and alert on whichever sees the call first. That's how our live firehouse runs.

  • What we need from any of them

    Incident number, call type, address, box or response area, units assigned and dispatch time. Never patient names or phone numbers.

Up and running in about a month

  1. Demo for your officers.
  2. Setup: we load your map books, hydrants and pre-plans and connect your dispatch.
  3. Two weeks side by side with your normal dispatch. We check every call.
  4. Go live. Your admin approves members; they install from the App Store.

Questions chiefs ask

Does this replace our dispatch or station alerting?

No. Bunkroom Alerts is a backup alert and reference tool. Your official dispatch, radio and station alerting stay in charge.

Is our data safe?

Everything needs a sign-in, and your admin approves every member. Data is encrypted in transit, and the servers are locked down. We don't take in patient details.

Our 911 center won't share CAD data. Can we still use it?

Usually yes. Most departments start with the dispatch email or text page the 911 center already sends.

What phones does it run on?

iPhone today.

What does it cost?

Pilot departments start free. Ask us for pricing for your department's size.

Try it with your department

Free pilot. We set up your map books and your dispatch link.

Request a demo